Control Timer adalah merupakan alat pendukung atau tambahan yang digunakan untuk Mengatur interval kerja pada autolube Lubrication System sesuai dengan keperluan pelumasan yang ingin di set (ditentukan).
Specsification and Type Control Timer Autolube Lubrication System kami Sirat Sumebar Utama:
IG502-E
IG 502-E adalah perangkat kontrol dan monitoring yang diaplikasikan pada Auto Lubrication system yang memiliki system progresif (tunggal). Kontrol timer IG 502-E dilengkapi dengan panel display untuk pengaturan parameter dan pemantau fungsi.
Features and benefits:
-
Universal control and monitoring device
-
Compact design
-
Easy to operate
-
Different operating modes, such as timer, counter and monitoring functions
-
Red LED failure indicator also shows failure cause
-
Integrated counters for permanent operation, failed hours and working-hour meter show system life cycle
-
PIN lockout feature to prevent unauthorized programming changes.
Specifications:
– Order No. IG502
-Associated cable harness 977-000-185.
– Power : 12 or 24 V DC
– Max. count load, terminal M 5 A
-SL-Output 4 Volt
– Type of enclosure IP 20, DIN 40050
– Temperature range -25nto +75o
– Max. fusing 5 A
– Programmable interval times 0.1 to 99.9 h
– Programmable pump running time 0.1 to 99.9 min
– Programmable pulses 0.1 to 99.9
– elapsed-time, fault hours memory 0.1 to 99999.9 h
VIP5 Controller
A feature packed compact Advanced Lubrication Controller for small and medium lubrication systems
Key features:
– 3 Operating Modes: CYCLE, PULSE and FLOW
– Integrated LCD, all operating values set by simple menu parameters
– Multi-cycle capable
– NPN, PNP, Namur and simple switch inputs can be connected.
– Min/Max Level Monitoring
– Prelube function
– Coded Remote Alarm System
– 4..20mA / 0..10V Inputs
VIP5 PRO Controller
Innovative controller with remote management already set, suitable for small and medium lubrication systems
Key features:
– Power: 110V~ – 230V~ – 400V~ – 460V~
– Frequency: 50/60 Hz
– Power consumption: 2 W (In Stop) – 10 W (In Start)
– Operating temperature: – 5 °C ÷ + 70 °C
– Storage Temperature: – 20°C ÷ + 80 °C
– Operating humidity: 90% max
Fact Controller
Controller for flow rate measuring
Key features:
– Supply voltage: Automatic range: 85to260 VAC – 50/60 Hz
– Power consumption: 30W
– Input signals: Flow meters 24 V DC NPN/PNP TYPE
– Output signals: Remote alarm contact 250 V 1A (switch)
– Operating temperature: -41°F to +131°F (- 5°C to + 55°C)
– Storage temperature: -68°F to +149°F (-20°C to + +65°C)
– Protection grade: IP64
VIP5 PRO ATEX Controller
Innovative controller with remote management already set, suitable for small and medium lubrication systems in explosive environments
Key features:
– Power:110V~ – 230V~ – 400V~ – 460V~
– Frequency: 50/60 Hz
– Power consumption: 2 W (In Stop) – 10 W (In Start)
– Operating temperature: – 5 °C ÷ + 70 °C
– Storage Temperature:- 20°C ÷ + 80 °C
– Operating humidity: 90% max
VIP5 PLUS CONTROLLER
Control device ideal for small and medium-sized dual line lubrication systems
Key features:
– Power: 110V~ – 230V~ – 400V~ – 460V~
– Frequency: 50/60 Hz
– Power consumption: 2 W (In Stop) – 10 W (In Start)
– Operating temperature: – 5 °C ÷ + 70 °C
– Storage Temperature: – 20°C ÷ + 80 °C
– Operating humidity: 90% max
VIP Controller
Key features
– Cycle time: from 10 seconds up to 5 minutes (increments of 10 seconds)
– Pause time: from 1 minute up to 60 hours (increments of 1 minute)
– Monitoring of oil level and lubrication cycle
– 4 Digit Display for easy pump operational monitoring and setting up
– Possible to modify the control parameters using the infrared communication
– Cycle counting through impulse counter
– Possible to halted-counting (pause and cycle)
Fact 2000
Flow Rate Meter
Specifications:
– Power supply Automatic range: 85÷260VAC – 50/60 Hz
– Power absorption: 30 W
– Input signals Flow meters: 24 V DC
– Output signals: ⇒ Servo Motors control for motorized Flowmaster 12 VDC
⇒ Remote alarm 250 V 1A (switch)
– Max Distance between FACT-2000 and FACT-Expander: 20 m (55 ft)
– Operating temperature: – 5°C ÷ + 55°C (-41°F ÷ +131°F)
– Storage temperature: -20°C ÷ +65°C (-68°F ÷ +149°F)
– Operating humidity: 90% max
Vip2 Advanced Lubrication Controller
Specifications:
– Power Consumption: 20 Watt
– Operating Temperature: -5C to +55C.
INPUT CONTACTS:
– Power: 110V AC Single Phase
– Oil Level: Level switch normally open/normally closed software selectable
– Control Input: 12V Max.
– N.O. Pressure Switch.
– Micro/Reed Switch
– Proximity (NPN/PNP Autodetect)
– Air Pressure Transducer: Located internally and connected via 6mm push-in fitting.
– Connect 6mm nylon tube to air mixing chamber.
– 0.0 Bar Min – 7.0 Bar Max with increments of 0.1 Bar .PT Sirat Sumebar Utama menyediakan Berbagai macam control timer untuk diaplikasikan pada Autolube Lubrication System. Dengan kualitas terbaik dan siap melayani pengiriman ke seluruh Indonesia. Kami memiliki pengalaman menjadi distributor dengan jaminan mutu serta harga terbaik dan juga melayani Install dan Re-Install Autolubrication system pada Bearing, Conveyor, Alat berat dengan mekanik yang berpengalaman.