Block Fedder merupakan suatu alat/komponen yang menjadi suatu bagian penting dan untuk mengarahkan aliran grease yang berasal dari pump grease ke point-point/titik point pelumasan pada system autolube Lubrication. Block Feeder terdiri dari satu poit input dan beberapa poit outlet yang masing-masing outputnya berbeda/sama (sesuai kebutuhan yang diperlukan) oleh poit yang akan di aliri grease.

Specsification Block Feeder yang kami tawarkan :

Progressive Line Modular Type

Progressive feeders, Group VKM

Apportionment

selection of fedder sections for the desired lubricant quantily

Progressive feeders, Group VPKM

Apportionment

selection of fedder sections for the desired lubricant quantily

Progressive feeders, Group VPBM

nPR+ – nano Progressive replaceable

Metering Divider Elements for the volumetric distribution

Key features:
– Singular outlet Flowrate: 0,025cm³ ‐ 0,045cm³ ‐ 0,075cm³ ‐ 0,105cm³
– Number of Dividers elements: 3 ÷ 12
– Working pressure: 15bar (218psi) ÷ 300bar (4350psi)
– Working temperature: -20°C ÷ +80°C
– Material: Zinc-Nickel plated steel
– Number of inversion at minute: 200 max.
– Inlet thread: G1/8″ – UNI ISO 228/1
– Outlet thread: G1/8″ – UNI ISO 228/1
– Lubricants: Min. Oil. 32 cSt –max. 2 NLGI grease

nP – nano Progressive

Key features:
– Singular outlet Flowrate: 0,025cm³ ‐ 0,045cm³ ‐ 0,075cm³ ‐ 0,105cm³
– Number of Dividers elements: 3 ÷ 12
– Working pressure: 15bar (218psi) ÷ 300bar (4350psi)
– Working temperature: -20°C ÷ +80°C
– Material: Nickel-plated steel
– Number of inversion at minute: 200 max.
– Inlet thread: G1/8″ – UNI ISO 228/1
– Outlet thread: G1/8″ – UNI ISO 228/1
– Lubricants: Min. Oil. 32 cSt –max. 2 NLGI grease

nP NANO-Progressive Aluminium

Progressive lubrication systems designed to resist rust formation

Key features:
-Singular outlet Flowrate: 0,025cm³ ‐ 0,045cm³ ‐ 0,075cm³ ‐ 0,105cm³
– Number of Dividers elements: 3 ÷ 12
– Working pressure: 15bar (218psi) ÷ 200bar (2900psi)
– Working temperature: -20°C ÷ +80°C
– Material: Aluminium
– Number of inversion at minute: 200 max.
– Inlet thread: G1/8″ – UNI ISO 228/1
– Outlet thread: G1/8″ – UNI ISO 228/1
– Lubricants: Min. Oil. 32 cSt –max. 2 NLGI grease

SMX/SMO Dividers

Modular progressive distributors SMO-SMX

Key features:
– The two outputs are combined by replacing the adapter. Just keep in stock a single element
– Air bleed valves built into both sides of the base
– SAE Metric – BSP – NPTF threads available. 
– Operates at : SMX 7.200 psi (500 bar) SMO 5.800 psi (400 bar)
– Grease and oil functioning
– Full monitoring controls. 
– The components are nickel-plated. 
– The bases are always supplied complete with standard ‘O’ rings

AIR/OIL SMX

The solution to reduce the use of lubricant with productivity increasing

Key features:
– Two separate inletS for compressed air and oil
– Oil Viscosity: 15÷1000 CSt
– Fluid Working Temperature: 0÷80°C

SMP / SMP Stainless Steel

Compact simple monoblock progressive divider valve for one to eighteen outlets

Key features:
– Min. Pressure: 20 Bar, 300 psi
– Max. Pressure: 300 Bar, 4400 psi
– Max. Cycles per min: 625 cycles
– Operating Temperature: -30 to 70 ºC, 22 to 158 ºF
– Lubricant viscosity: Min.: oil 32 cSt Max.: grease NLGI 2
– Material: nickel-plated steel and Stainless steel Aisi 304
– Cycle Sensor 
– Proximity Type: PNP or NPN 10-30V DC – 200 mA

SMPM

Compact simple monoblock progressive divider valve until to eighteen

Key features:
– Min. Pressure: 15 bar (220 psi)
– Max. Pressure: 100 bar (1470 psi)
– Max Cycles per min.: 625 cycles
– Operating Temperature: -10 a 70 ºC 14 a 158 ºF
– Lubricant Viscosity: Min.: oil 32 cSt
– Max.: grease NLGI 2 
– Material: Zinc Plated Steel

Serial SXO Aluminum

Modular progressive distributor SXO aluminum body

Key features:
– Operating pressure: min. 20 bar (290 psi) – max 200 bar (2900 psi)
– No. of Cycles/minute: 200 max.
– Tie-rod clamping torque: 1 kgm max.
– Lubricant: oil min. 32 cSt (149 SUS) – grease max. 2 NLGI (265-295 ASTM)

Serial “SA” metering elements

Specifications:
– Working pressure max 400 bar (5700 psi) min 20 bar (290 psi)
– Working pressure without check valves (for recirculating systems) min 12 bar (170 psi)
– No. cycles per minute max. 120
– Driving torque for tie rods max 3 Kgm (21 lbs.ft)

By-pass platelet

Platelets with function of bridge element

Inside of the modular elements’s family, has been inserted a new series of members: the platelets. They come mounted between the base and the dividers, and acquit the same function of the dividers bridge, with the advantage, not negligible, of a greater flexibility of use. In fact, taking apart the platelet, it’s possible to restore the escapes previously sluices. Available in AVP in stainless steel (AISI 316).

SMX Stainless Steel

Easy and flexible assembly and low cost maintenance

Key features:
– Material AISI 316
– The two outputs are combined by replacing the adapter. Just keep in stock a single element
– Air bleed valves built into both sides of the base
– SAE Metric – BSP – NPTF threads available.
– Operates at 500 bar (7350 psi).
– Grease and oil functioning
– Full monitoring controls.
– The bases are always supplied complete with standard ‘O’ rings and fixing screws.

Dual Line Modular Type

Modular Dual Line

Dual Line Lubrication Divider Valves Series 02

Key Features:
-Temperature range: -30 to +80°C
– Max pressure (inlet): 400bar (5800psi)
– Min. Viscosity: 100 cSt ( 462 SSU)
– Grease Max: 265 ASTM (NLGI 2)
– Connections: – inlet : 3/8″ BSP or 3/8″ NPTF
– outlet: 1/4″ BSP or 1/4″ NPTF
– Outlets: from 2 to 16

DM- XOVER SUB-BASE

The easy way to go modular on your existing traditional DUAL LINE system

 Key Features:
– Temperaute range:    -30 to +80°C
– Max pressure (inlet): 400bar/5800psi
– Min. Viscosity:           100 cSt ( 462 SSU)
– Grease Max:              265 ASTM – NLGI 2
– Connections:             inlet : 3/8″ NPTF – outlet: 1/4″ NPTF

DM – Solid base

Key features:
-Temperature range: 22 °F ÷ 176 °F (- 30 to + 80°C)
– Max pressure (inlet):  5800 psi (400 bar) 
– Min. Viscosity: 100 cSt ( 462 SSU) 
– Grease Max: 265 ASTM (NLGI 2) 
– Inlet connections : 3/8″ BSP or 3/8″ NPTF  
– Outlet connections: 1/4″ BSP or 1/4″ NPTF
– Outlets: from 2 to 12

DM AIR/OIL VALVE

Key features:
– Temperature range–30°C to + 80°C (-22°F +176°F)
– Frequency:100 cycles/min.
– Max pressure inlet: 400 bar (5800 psi)
– Air pressure: 1.5÷3 bar
– Oil min. viscosity: 15 cSt
– Oil max. viscosity: 460 cSt

Dual Line Non- Modular Type

Feeder Block Series AP1

Adjustable Discharge 0,1 – 1 cc. per stroke (.006 – .061 cu.in./stroke) Dual Line System

Key Features:
– Temperaute range: -30 to +80°C
– Max pressure (inlet): 400bar (5800psi)
– Cycles: 100/min
– Min. Viscosity: 100 cSt ( 462 SSU)
– Grase Max: 265 ASTM (NLGI2)
– Connections: – inlet : 1/4″ – outlet: 5/16″ -24NF

Feeder Block Series APF05-APF1

Fixed Discharge APF05 0,5 cc. APF1 1 cc. per/stroke (APF05 .030 cu.in./stroke APF1 .061 cu.in/stroke) Dual Line System

Key Features:
–Temperaute range: -30 to +80°C
– Max pressure (inlet): 400bar (5800psi)
– Cycles: 100/min
– Min. Viscosity: 100 cSt ( 462 SSU)
– Grease Max: 265 ASTM (NLGI 2)
– Connections: – inlet : 1/4″ – outlet: 5/16″ -24NF 

Feeder Block Series AP6

Adjustable Discharge.25-1.5 cc.per/stroke (.15 -.091 cu. in./stroke) Dual Line System

Key Features:
-Temperaute range: -30 to +80°C
– Max pressure (inlet): 400bar (5800psi)
– Cycles: 100/min
– Min. Viscosity: 100 cSt ( 462 SSU)
– Grease Max: 265 ASTM (NLGI 2)
– Connections: – inlet : 1/4″ – outlet: 1/4″

Feeder Block Series AP6F

Fixed Discharge 1,5cc. per stroke (.091 cu.in./stroke) Dual Line System

Key Features:
-Temperaute range: -30 to +80°C (-22-+176oF.)
– Max pressure (inlet): 400bar (5800psi)
– Cycles: 100/min
– Min. Viscosity: 100 cSt ( 462 SSU)
– Grease Max: 265 ASTM (NLGI 2)
– Connections: – inlet : 1/4″ – outlet: 1/4″

Feeder Block Series AG6

Adjustable Discharge 0,25-3cc.per/stroke (.015 -.183 cu. in./stroke) Dual Line System

Key Features:
-Temperaute range: -30 to +80°C
– Max pressure (inlet): 400bar (5800psi)
– Cycles: 100/min
– Min. Viscosity: 100 cSt ( 462 SSU)
– Grease Max: 265 ASTM (NLGI 2)
– Connections: – inlet : 3/8″ – outlet: 1/4″ 

Feeder Block Series AG 6F

Fixed discharge 3 cc. per stroke (.183 cu. in./stroke)

 Key Features:
-Temperature range: -30 to +80oC
– Max. pressure (inlet): 400 bar (5800 psi.)
– Cycles: 100/min.
– Min. Viscosity: 100 cSt (462 SSU)
– Grease Max.: 265 ASTM (NLGI 2)
– Connections: – Inlet: 3/8″ – Outlet: 1/4″

Feeder Block Series AGG6

Adjustable discharge 1.5 -12 cc. per stroke (.091 – .732 cu. in./ stroke) Dual Line System

 Key Features:
-Temperature range: -30 to +80°C
– Max. pressure (inlet): 400 bar (5800 psi.)
– Cycles: 100/min.
– Min. Viscosity: 100 cSt (462 SSU)
– Grease Max.: 265 ASTM (NLGI 2)
– Connections: – Inlet: 3/8″ – Outlet: 3/8″

Feeder Block Series AGG6F

Fixed Discharge 12 cc. per/stroke (.732 cu. in./stroke) Dual Line System

Key Features:
– Temperature range: -30 to +80oC
– Max. pressure (inlet): 400 bar (5800 psi.)
– Cycles: 100/min.
– Min. Viscosity: 100 cSt (462 SSU)
– Grease Max.: 265 ASTM (NLGI 2)
– Connections: – Inlet: 3/8″ – Outlet: 3/8″ 

Double control metering valves

For Dual Line Lubrication Systems

These units are used especially on heavy machinery.
The user can install the valves in the most convenient place, but it is recommended, in case the unit is used without box, to use it  in a relatively clean area away from water and dust.

This system ensures safe and always checked operation even in those cases in which working conditions could make  impossible to use any other kind of dispenser.

These metering valves are  the double checking version of some Double line metering valves. The use of these units is required where  the guarantee of absolute good functioning is required for both dispenser’s outputs. Each tower is in contact with a microswitch, which gives an electronic signal whenever the equipment feeds the system.

PT Sirat Sumebar Utama menyediakan Berbagai macam Block Feeder dengan kualitas terbaik dan siap melayani pengiriman ke seluruh Indonesia. Kami memiliki pengalaman menjadi distributor  dengan jaminan mutu serta harga terbaik untuk Anda.